I am such a fan of My Pink Stamper so when she posted this color challenge, I just had to participate! It took me until tonight to get my entry done because I haven't been feeling well due to some gallbladder issues!! At any rate, here it is!! I really love the new Robotz cartridge!! I wanted to make a girl robot so I chose this one for a get well card. I cut the robot from page 41 at 3.42" with my Gypsy. All the layers were cut at 3.42" also. I used pop dots to mount the robot. The sentiment was also cut from Robotz at .79" welded and cut with my Gypsy. For the sentiment, I used the cricut markers first, then cut it out so that it would be outlined. Hope you enjoy! I'm going to have a lot of fun with this cartridge!!
Hello everyone and welcome to the "Be My Valentine" blog hop!! This is the first blog hop that I have had the opportunity to participate in and I've had so much fun! If you arrived here from Macy Bella Designs then you're on the right track. If not or if you have missed a few blogs along the way, be sure to go to the beginning at Creations With Kathryn so you can see all of the great Valentine projects today!! There are even some blogs that have blog candy - (like ME!) After you check out my project, your next stop will be Crafty Baskets . Now, on to my project!! I made a box to put a set of Valentine's cards in. I used a 12x12 piece of double-sided cardstock from K and Co. The cards are made with Kraft paper and are a 4x4 size. I used the Cricut Sentimentals cartridge for the postage stamp cut on the front of each card and used my Gypsy to cut them so I could unlink the H and W so it would be 3.75" square. The valentine cuts for the fro...
Comments
Pam